Katy Irrigation Guide

Sprinkler system installation in Katy, TX

Quick answer: A new irrigation system in Texas must be designed and installed by (or under the on-site supervision of) a TCEQ Landscape Irrigator, follow 30 TAC 344 design rules, include a rain/moisture shut-off device, and be connected through an approved backflow prevention method.

30 TAC 344.35 makes the irrigator responsible for permits and inspections, a written irrigation plan, on-site supervision, a final walk-through, a maintenance checklist, a permanent sticker on the controller and a copy of the design plan.

Design rules (30 TAC 344.62) include head spacing within the manufacturer's radius, heads at least 4 inches from hardscape, no above-ground spray in strips under 48 inches wide bordered by pavement on two sides, colored PVC primer, and at least 6 inches of cover over pipe and wire unless the manufacturer specifies otherwise.

Ask your city or MUD whether an irrigation permit or inspection is required - the irrigator is responsible for obtaining it.

9 licensed companies listing sprinkler system installation

Questions and answers

What should a sprinkler installation quote include?

Number of zones, head and nozzle types, controller model, rain/moisture sensor, backflow assembly type, permit/inspection, and confirmation that you will receive the design plan and maintenance checklist required by 30 TAC 344.35.

How much does a new sprinkler system cost near Katy?

One Cypress company publishes a typical residential range of $2,500-$5,500 depending on yard size and complexity (see cost guide). Get written quotes for your own lot.

Related: Texas licensing explained · published prices · watering rules